10″ Raspberry Pi Rackmount Kit | 2x Pi Slot | 2x Connector | 1.00U

>> Suitable for all Single Board Computers (SBC) with Raspberry Pi form factor

10" Raspberry Pi rack
10" Raspberry Pi rackmount
10" Raspberry Pi rack mount
10" Raspberry Pi rack
Raspberry Pi rack
Raspberry Pi rack mount
Raspberry Pi rackmount
10" Raspberry Pi rack - UM-SBC-306
10" Raspberry Pi rackmount - UM-SBC-306
10" Raspberry Pi rack mount - UM-SBC-306
10" Raspberry Pi rack - UM-SBC-306
Raspberry Pi rack - UM-SBC-306
Raspberry Pi rack mount - UM-SBC-306
Raspberry Pi rackmount - UM-SBC-306
previous arrow
next arrow
10" Raspberry Pi rack - UM-SBC-306
10" Raspberry Pi rackmount - UM-SBC-306
10" Raspberry Pi rack mount - UM-SBC-306
10" Raspberry Pi rack - UM-SBC-306
Raspberry Pi rack - UM-SBC-306
Raspberry Pi rack mount - UM-SBC-306
Raspberry Pi rackmount - UM-SBC-306
previous arrow
next arrow

The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).

The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).

2x Pi on 1.00U in the 10 inch server cabinet

With the “UM-SBC-306” you can neatly accommodate up to two Raspberry Pi´s or similar SBCs on 1.00U in the 10″ Rack. Each Pi is screwed to the Rackmount Kit four times with M2.5 screws (included in the scope of supply). After mounting the Pi´s on the rack, you have 34 mm from the bottom of the circuit board to top of the Raspberry Pi Rack for possible structures (PoE-HAT, USV). Single board computers are not included.

Details

Configuration options of the “UM-SBC-306”

Like every Raspberry Pi Rackmount Kit from us, you can configure the “UM-SBC-306” according to your specific needs.

Rail System

This allows your devices to be conveniently operated by pulling out the rackmount kit. A telescopic rail on each side of the Raspberry Rack allows for easy access. The rail extension is 200 mm. We recommend it if you want to always have access to your memory card without dismantling the rackmount kit.

Keystone Inline Coupler

For each Pi a keystone connector slot is avaliable. Choose the keystone inline coupler type you need. Note that the “Push Button Connector” needs to be soldered.

LEDs

To display the status LEDs of your Pi on the front. Must be glued and soldered when assembling.

Fan 40×40

The “UM-SBC-306” offers a mounting option for up to 2 fans (40 x 40 mm with a hole spacing of 32 x 32 mm). This allows the devices to be additionally ventilated. Each fan attaches to the rackmount kit with two screws directly behind the Pi.

Slot Display

The slot display is a bracket that allows a display to be installed in the rack kit. It occupies one Pi slot and mounts in the same rackmount kit holes as the Pi. Can be used to display important information about your running system. Note that the display is not included.

Slot Cover

This allows free slots in the rackmount kit to be covered. It mounts to the same rackmount kit holes as the Pi. Perfect if you want to temporarily cover one or more slots and upgrade your system at a later date.

Rack Panel 1.00U

This allows the free space of the rack mount kit to be closed up to the next full rack unit. You can choose between an air or blank version.

UM-SBC-306

Delivery time: 4-5 days | available immediately

Supported Models:
Raspberry Pi 4B
Raspberry Pi 3B+
Raspberry Pi 3B
Raspberry Pi 2B
SBC with Raspberry Pi form factor | Details

Rack: 10 inch
Rack Unit: 1.00U
Material: Steel
Color: Black RAL 9005
Dimensions*: 254 x 43.4 x 210 mm

*) Dimensions = width/height/depth

Price starting from:

99,60 

2x Pi on 1.00U in the 10 inch server cabinet

With the “UM-SBC-306” you can neatly accommodate up to two Raspberry Pi´s or similar SBCs on 1.00U in the 10″ Rack. Each Pi is screwed to the Rackmount Kit four times with M2.5 screws (included in the scope of supply). After mounting the Pi´s on the rack, you have 34 mm from the bottom of the circuit board to top of the Raspberry Pi Rack for possible structures (PoE-HAT, USV). Single board computers are not included.

Details

Configuration options of the “UM-SBC-306”

Like every Raspberry Pi Rackmount Kit from us, you can configure the “UM-SBC-306” according to your specific needs.

Rail System

This allows your devices to be conveniently operated by pulling out the rackmount kit. A telescopic rail on each side of the Raspberry Rack allows for easy access. The rail extension is 200 mm. We recommend it if you want to always have access to your memory card without dismantling the rackmount kit.

Keystone Inline Coupler

For each Pi a keystone connector slot is avaliable. Choose the keystone inline coupler type you need. Note that the “Push Button Connector” needs to be soldered.

LEDs

To display the status LEDs of your Pi on the front. Must be glued and soldered when assembling.

Fan 40×40

The “UM-SBC-306” offers a mounting option for up to 2 fans (40 x 40 mm with a hole spacing of 32 x 32 mm). This allows the devices to be additionally ventilated. Each fan attaches to the rackmount kit with two screws directly behind the Pi.

Slot Display

The slot display is a bracket that allows a display to be installed in the rack kit. It occupies one Pi slot and mounts in the same rackmount kit holes as the Pi. Can be used to display important information about your running system. Note that the display is not included.

Slot Cover

This allows free slots in the rackmount kit to be covered. It mounts to the same rackmount kit holes as the Pi. Perfect if you want to temporarily cover one or more slots and upgrade your system at a later date.

Rack Panel 1.00U

This allows the free space of the rack mount kit to be closed up to the next full rack unit. You can choose between an air or blank version.

Configurator

Configure the Rack Mount Kit according to your requirements here.

99,60 

Delivery time: 4-5 days | available immediately

In stock

  • This allows your devices to be conveniently operated by pulling out the rack mount kit.

  • This allows the rear connections of your device to be operated on the front of the rack mount kit.

    *Connector 1
    *Connector 2
  • This allows the status of your device to be displayed on the front of the rackmount kit.
    *LED green
    *LED red
    *LED yellow
  • This allows the devices to be additionally ventilated.


    • max. 2 pcs.

    • max. 2 pcs.
  • The Slot Display is a bracket that allows your display to be installed in the rack mount kit.


    • max. 2 pcs.

    • max. 2 pcs.
  • This allows free slots in the rack mount kit to be covered.

    • max. 1 pcs.
  • This allows the free space of the rack mount kit to be closed up to the next full rack unit.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.