- Display 15 Products per page
Barracuda rack mount kits
Find the right Barracuda rack mount kit for you and mount your Barracuda easily and without screws in the 19 inch server cabinet. All Barracuda rack mount kits are precisely tailored to the appropriate device model and ensure quick and clean installation in the 19″ rack.
Features of our Barracuda rack mount kits
Ports on the front
With a simple keystone + cable combination, we bring the Barracuda ports from the back to the front of the rack mount kit.
The keystones end flush and make further wiring in the rack much easier. A front foil labels each connector.
Screwless mounting
The Barracuda´s are mounted securely and non-slip on our rackmount kits using a special Strap System. Without using screws or other aids acting on the device.
The straps are fixed with high-quality Velcro. In combination with our spacer, a sufficient distance is created between the Velcro and the Barracuda´s to prevent damage to the housing.
This also prevents a possible loss of warranty.
Cooling
Cutouts on the bottom and side surfaces of the rackmount kit ensure sufficient cooling in the system. Even after attachment to the rackmount kit, the outlets are not covered by our screwless Strap System.
Our Barracuda rack mount kits
What is the right Barracuda rack mount kit for me?
19″ Barracuda rack mount
The following Barracuda rack mount kits have been specifically designed and developed for installation in a 19″ rack. We currently offer three Barracuda rack mount kits for mounting a Barracuda in a 19″ rack.
Barracuda models can have different revision types. We recommend always checking the Barracuda product model revision.
Barracuda F12 rack mount
We currently offer one rack mount kit for the Barracuda F12. NM-BAR-003 neatly mounts your Barracuda F12 (Rev.B) and its power supply unit in a 19″ rack. All ports are on the front of the rack mount kit. The NM-BAR-003 requires 1.37 U.
Barracuda F18 rack mount
For the Barracuda F18 we offer three rack mount kits.
NM-BAR-001 and NM-BAR-002 are supporting the older version F18 (Rev.A) and NM-BAR-003 the newer version F18 (Rev.B).
The difference between NM-BAR-001 and NM-BAR-002 is that NM-BAR-001 supports all ports and NM-BAR-002 only supports one out of four USB2.0 and no VGA.
Both rack mount kits neatly mount the A Revision of the F18 with power supply unit in the 19” rack and require 1.37U.
As mentioned above, NM-BAR-003 supports the B Revision of the Barracuda F18. All ports are on the front of the rack mount kit. The NM-BAR-003 requires 1.37 U.
Barracuda F80 rack mount
For the Barracuda F80 we also offer three rack mount kits.
As with the Barracuda F18 rack mount kits, NM-BAR-001 and NM-BAR-002 support the older version F80 (Rev.A) and NM-BAR-003 supports the newer version F80 (Rev.B).
The difference between NM-BAR-001 and NM-BAR-002 is that NM-BAR-001 supports all ports and NM-BAR-002 supports only one of four USB2.0 and no VGA.
Both rack mount kits neatly mount the A Revision of the F80 with power supply unit in the 19” rack and require 1.37U.
NM-BAR-003 supports the B Revision of the Barracuda F80. All ports are on the front of the rack mount kit. The NM-BAR-003 requires 1.37U.
Barracuda X50, X100, X200 rack mount
For the Barracuda X-Series we offer two rack mount kits, NM-BAR-001 and NM-BAR-002. Both support the X50, X100 and X200 and require 1.37U. The only difference between the two is that NM-BAR-001 supports all ports and NM-BAR-002 only supports one of four USB2.0 and no VGA.
Scope of supply
All Barracuda rack mount kits have the following as standard included in the scope of supply.
- 4 x Rack Mount Screw Set
- 10 x Cable Tie 100mm
- 5 x Cable Tie 300mm
- 1 x Velcro Strap with Spacer (Strap System)
- 1 x Product Data Sheet
- 1 x Assembly Instructions
