Insert F – Raspberry Pi – Air
The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).
The illustrations shown, partly with cables shown schematically, are symbolic representations. They can contain extras that are subject to a surcharge (see configurator).
The „Insert F“ allows you to mount a Pi in one of our modular Raspberry Pi Rackmount Kits with enough space for additional Raspberry Pi add-on boards such as PoE-Hat or USV.
- For mounting one Raspberry Pi with possible Pi add-on-boards
- Version – Air
- Occupies two slots
zr-sbc-906
Supported Models:
UM-SBC-207
UM-SBC-211
UM-SBC-308
Dimensions*: 62 x 82 x 89 mm
Color: Black RAL 9005
*) Dimensions = width/height/depth
Price:
The „Insert F“ allows you to mount a Pi in one of our modular Raspberry Pi Rackmount Kits with enough space for additional Raspberry Pi add-on boards such as PoE-Hat or USV.
- For mounting one Raspberry Pi with possible Pi add-on-boards
- Version – Air
- Occupies two slots
Available build space for Raspberry Pi add-on boards
If you are toying with the idea of accommodating additional boards such as PoE-HAT or UPS in the rack, you will find the available scope below.
Insert D:
From the lower edge of the circuit board to the lower edge of the slot, you have 25.2mm available.
- PoE-HAT: There is 4mm space from the fan screw head to the lower edge of the slot.
- USV: There is 2mm space between the top edge of the GPIO pins and the bottom edge of the slot.
Insert E, F:
From the lower edge of the circuit board to the lower edge of the slot, you have 56.4mm available.
- PoE-HAT: There is 27.2mm space from the fan screw head to the lower edge of the slot.
- USV: There is 25.2mm space between the top edge of the GPIO pins and the bottom edge of the slot.
Nur angemeldete Kunden, die dieses Produkt gekauft haben, dürfen eine Bewertung abgeben.
Bewertungen
Es gibt noch keine Bewertungen.